Results 1 to 7 of 7

Thread: Driver ID help....

  1. #1
    Senior Hostboard Member just me now's Avatar
    Join Date
    November 17th, 2004
    Posts
    230
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    http://www.wavemusic.com/community/s...&threadid=4767

    can anyone ID these drivers based on the pics?

    not famillar with these. they are earlier than my drivers...

    thanks all

  2. #2
    Senior Hostboard Member
    Driver ID help....


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    Note the surrounds around the diapragm. Not aluminum. These appear to be 808-8A drivers circa early 1970's. these are called Symbiotik diapragms and are the least desirable. As they appear to be blown, they'll need replacing anyway.
    I would recommend the Pascalite diapragms. some people feel the aluminum diapragms sound better, but they don't handle as much power.

    I would recommend sending them to Great Plains if it is practical. they will fit new diapragms and recharge the magnets very cheaply. If not practical just give them this info and they will tell you which diapragms. I don't recall the part numbers offhand but if you need I can look them up. HTH.

  3. #3
    Senior Hostboard Member just me now's Avatar
    Join Date
    November 17th, 2004
    Posts
    230
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    so that is a symbiotic diaphragm.... good to know...

    I have a 808B that has a simmilar appearing diaphragm in it...

    I'll let my friend know what driver it is (already pointed him the way of GPA)

    Thanks a bunch!

  4. #4
    Inactive Member bfish's Avatar
    Join Date
    December 1st, 2004
    Posts
    2,891
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Looks like there's one 806 or 807 (the thinner one), and one 802 or 808. While they use the same diaphragm, the smaller one is slightly less sensitive. Agree with Old Guys 'phram suggestions, he'll just need to know if he needs 8 or 16 ohms. Couldn't find the old part number to be of any help with that.

  5. #5
    Inactive Member bfish's Avatar
    Join Date
    December 1st, 2004
    Posts
    2,891
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Finally found the part #. A 21545 is 8 ohms, and was original in both 807s and 808-8As.

  6. #6
    Senior Hostboard Member
    Driver ID help....


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    "Looks like there's one 806 or 807 (the thinner one)"

    Thanks- didn't notice that. the 807 and 808 did use the same diaphragm as you noted.
    From Great Plains:

    Symbiotik? diaphragms are no longer available. If high power handling is required, and excellent HF frequency response is also needed, use diaphragm #26420 (8 ohms).

    Almost forgot- the newer diapragms require a kit because connections to the diaphragm have changed. Great Plains carries these also.

  7. #7
    Senior Hostboard Member just me now's Avatar
    Join Date
    November 17th, 2004
    Posts
    230
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    thanks again....

    you guys are the best!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 28131802 times.